FORMALDOXIME COLOUR REAGENT - Names and Identifiers
FORMALDOXIME COLOUR REAGENT - Physico-chemical Properties
| Molecular Formula | CH3NO
|
| Molar Mass | 45.04 |
| Density | 1.1330 |
| Melting Point | 1.3°C |
| Boling Point | 48.9°C (rough estimate) |
| Water Solubility | 170g/L(20 ºC) |
| pKa | 11.10±0.10(Predicted) |
| Storage Condition | 0-10°C |
| Refractive Index | 1.4400 (estimate) |
| Physical and Chemical Properties | EPA Chemical Information Formaldehyde, oxime (75-17-2) |
FORMALDOXIME COLOUR REAGENT - Risk and Safety
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
| RTECS | LP9720000 |
FORMALDOXIME COLOUR REAGENT - Upstream Downstream Industry
FORMALDOXIME COLOUR REAGENT - Introduction
FORMOXIME, chemical formula CH3NO, is an organic compound with the following properties:
1. Appearance: colorless to light yellow crystal or crystalline powder;
2. Solubility: soluble in water, alcohol and ether and other organic solvents;
3. Melting Point: about 68-76 degrees Celsius;
4. FORMOXIME is a stable compound that can be stored at room temperature.
FORMOXIME has several uses in practice:
1. Polymer production: FORMOXIME can be used as a reagent for synthetic polymers, such as synthetic polyurethane, phenolic resin, polyether ketone, etc., thereby improving its performance;
2. Preparation of ion exchange resin: FORMOXIME can react with substances containing hydroxyl groups to form amination products, which in turn can be used to prepare ion exchange resins;
3. Reducing agent in organic synthesis: FORMOXIME can be used as a selective reducing agent for organic synthesis reaction.
FORMOXIME has various preparation methods. One commonly used method is to synthesize by oxidizing formaldehyde. The specific steps are to react formaldehyde with hydrogen peroxide to generate FORMOXIME:
CH2O H2O2 → CH3NO H2O
when using FORMOXIME need to pay attention to security matters:
1. FORMOXIME, whether solid or solution, is irritating to the eyes and skin, and should be rinsed with water immediately after contact;
2. Use should wear appropriate personal protective equipment, such as gloves and goggles;
3. Avoid inhaling FORMOXIME gas or solution vapor, and maintain a well-ventilated working environment;
4. In the storage and use of FORMOXIME, should comply with chemical safety procedures, and away from combustibles, heat sources and sparks.
Last Update：2024-04-10 22:29:15